The elevator structure becomes more and more compact.
In accordance with design specifications, the advancement of elevator safety regulations and the rapid opening of elevator capabilities, the elevator structure has been continuously changed. The elevator decoration is supposed to be not only beautiful but also the opening trend of the structure. The following is a brief introduction from the elevator structure requirements in the elevator structure.
In order to take advantage of the high utilization of the building shaft, the elevator structure is becoming more and more compact. The car wall equipment is more of an in-line structure, the space between the manhole wall and the car wall is small, and the operator cannot go to the rear of the car equipment. The personnel’s method of accessing equipment in the shaft is gradually becoming inapplicable. The trend of decorating the car:
- It is installed in front of the factory with the base cart wall. The location is the same as that of conventional devices. The car wall adds the thickness and weight of the decoration.
- Renovating the old ladder from the beginning, similar to home decoration, it is necessary to take into account the perfection of the decoration and the splicing of the decoration materials in the car (some new ladders can use this method even after the construction site equipment is good that Interior of the car in the car).
The new specification aims at the requirement that the elevator can be placed on the stretcher in the living room. The vehicle specification is almost thin and long or narrow. However, the net size of the elevator in the market is around 1600 x 1500 which is close to the square. Therefore, most of the original decoration of the original plan is not applicable to these vehicle specifications. For this requirement, the appropriate decoration style for residential ladder must be planned.